Cleaning Products
From A to Z: M







"Magical  Sponge"


CHEMICAL-FREE SPONGE
Uses ONLY Water


for GRAFFITI, TOUGH SOILS, & 
STUBBORN STAINS


"GREEN": "ENVIRONMENTALLY-RESPONSIBLE"
"The MAGICAL SPONGE" breaks up stubborn stains and dirt effortlessly leaving surfaces looking like new. It works at the source, lifting trapped dirt from grooves and surfaces.

"The MAGICAL SPONGE" is truly the easiest way to clean hard surfaces with potentially permanent marks. Simply wet the sponge and effortlessly rub it across set-in dirt and grime. Watch the sponge magically erase stains and tough dirt from surfaces using only water. It is free of harmful chemicals, environmentally friendly, and safe for your hands and skin.

It magically eliminates stubborn stains such as permanent markers, inks, pencil marks, scuff marks, and grime from walls, wallpaper, doors, floorboards, tile, wood flooring, countertops, work surfaces, lockers, signs, dry-erase boards, copy machines, vinyl, glass, plastic trim, leather, hard furniture, outdoor furniture, shower doors, car wheels, stainless cookware, computer monitors and hardware, church pews, sneakers and more. Especially effective on tea, coffee, and wine stains. Shines chrome, brass, and copper surfaces.

Note: Test on a small area before applying to entire surface.

Safety Data

Package
30 sponge pads/case
Each 3 Layer Pad
Size=2.8875 in. X 4.375 in.
Wholesale
Price

$74.63/cs

Website
Price

$59.70/cs






FOR FLOORS AND WALLS



MOLD INHIBITOR

             

  • Inhibits Microorganism Growth ...Such As Mold & Bacteria


  • Controls the Reformation of Biofilms On Floor / Wall / & Ceiling Spaces :
    Dry Surfaces - Min. 2 Years
           Wet Surfaces - Approx.6 Months

  • A Post Preventative Measure to Inhibit and Prevent
    Mold & Mildew from Re-appearing


  • Eliminates Musty, Foul Odors Caused By Microbial Growth


  • Controls Contaminants That Cause Poor IAQ


  • Reduces Staining And Discoloration To Surfaces
    Caused By Microbial Growth


  • NO Need To Evacuate Premises During Application


  • WILL NOT Stain Or Bleach Most Surfaces


  • EPA Reg. No. 67212-2


  • "GREEN": "ENVIRONMENTALLY - SENSITIVE"

    The proper use of "MAINTAIN C1 for FLOORS & WALLS"  ( formerly “ MicroBiocide”  #440 ) controls and inhibits known biological pollutants that promote poor Indoor Air Quality ( “ IAQ ”). Floors and Walls damaged by excessive moisture, high levels of humidity, or water leaks and floods are a source for microbial contamination that may degrade a facility's IAQ. Controlling this contamination is essential to maintaining the quality of air inside buildings and reducing further damage to surfaces and objects as well as occupants.

    "MAINTAIN C1 for FLOORS & WALLS"  ( formerly “ MicroBiocide”  #440 )  is an antimicrobial treatment that controls and inhibits the growth of microorganisms - such as gram positive and gram negative bacteria, and mold - on floors and walls. Damp musty odors caused by microbial contamination from excessive moisture, high levels of humidity, and flood and water damage is a serious problem in many living and working environments. Unsightly black mold streaks on walls and floors are all too often en-countered in all types of buildings today. Microorganisms are everywhere causing odors, damaging surfaces and secreting toxic byproducts to living and working areas. is specially formulated not only to control the growth of microorganisms on floors and walls, but its residual effect inhibits the re-growth of microbes for months. It controls contaminants that often cause poor Indoor Air Quality ( “ IAQ ”) and “ Sick Building Syndrome.”

    "MAINTAIN C1 for FLOORS & WALLS"  ( formerly “ MicroBiocide”  #440 ) is low in toxicity and there is no need to evacuate the premise during application. It is easily applied with the used of a compressed air sprayer or fogging device. Depending on surface texture and absorbency, coverage ranges from two to six hundred square feet per gallon ( 1000-3000 square feet per 7.5 gallon ) of diluted solution. Thoroughly saturate all areas to be treated ( including floors, walls, wall voids and spaces, ceilings,ceiling spaces ) and leave wet. DO NOT RINSE OFF. If there is visible dirt or biofilm on surface, these areas should be remediated and cleaned first...and then apply "MAINTAIN C1 for FLOORS & WALLS"  .

    During the first step, when handling "MAINTAIN C1 for FLOORS & WALLS"  's highly concentrated activator, it is advised to wear eye protection and rubber gloves. Since the applicator may come into contact with microorganisms throughout the remediation process, it is also a good policy to wear respiratory protection. NO OTHER SPECIAL CLOTHING OR EQUIPMENT IS NECESSARY DURING APPLICATION.

    F.Y.I. ... Molds and mildews can be very destructive to materials on which they grow, and are usually unwelcome and unhelpful in buildings. They cause staining, decomposition (rotting of materials) and objectionable, musty odors. Where colonies are extensive they can also produce enough spores, and by-products to be harmful to health. Many of the by-products of mold and mildew are irritating to skin, eyes and respiratory tracts. Some molds produce true allergic sensitization and allergic reactions in susceptible people. Some molds produce toxic by-products that could be harmful to skin, and poisonous if ingested or inhaled in quantity.

    As a direct result of a roof or plumbing leak, water may become trapped inside walls or ceiling spaces; or under carpeting which may cause molds to grow there. Flooding, leaking water pipes or fixtures, backed-up or faulty drain plumbing, leaky roofs, use of humidifiers, extensive use of hot water indoors (laundering, cooking, bathing) without adequate exhaust venting for steam, damp basements or crawlspaces, houseplant water or aquarium leakage, indoor clothes drying, and unvented combustion appliances are all important sources of indoor moisture, and can also encourage mold growth. Heavy condensation ( “sweating” ) of windows, exterior walls or other cold objects indicates excessive moisture and inadequate venting.

    Damp or flooded basements, bathrooms with inadequate ventilation, ceilings and ceiling spaces, wall spaces after roof leaks and other areas of a building damaged by moisture can all create indoor air quality problems. Mold, mildew and fungus can growth in damp environment, and release spores and other allergens that impact indoor air quality. People living or working in moldy environments can suffer hayfever-like symptoms or other more serious health problems.

    Living spaces that are inadequately ventilated and/or heated, or articles stored in such areas may develop mold problems. Areas such as closets, cellars, and basements may have poor air circulation and elevated humidity. These conditions are an ideal climate for mold growth and the odors and damages to surfaces that are associated with mold. The most important thing to do is to determine where the excessive moisture is coming from, and correct that problem. Molds cannot grow on dry materials even if all other conditions are ideal for mold growth. Conversely, mold and mildew cannot be controlled where moist materials exist. Growing colonies of mold can be killed by swabbing or spraying with our user-friendly “MOLD & MILDEW OXIDIZER ”. However, if the material remains moist, the mold will grow back very quickly unless post-treated with "MAINTAIN C1 for FLOORS & WALLS" . Often repair of surfaces and refinishing is required. Damaged paper or fabrics such as carpets, rugs, drapes, stuffed furniture, bedding, and clothing may not be salvagable at all. Damp sheetrock and loose or spongy floor-covering may indicate that the interior of a wall or floor is still wet or moist and may mean serious internal structural problems.

    "MAINTAIN C1 for FLOORS & WALLS" will control the growth of mold on the floor joist and sub-floor in crawlspaces; and drywall. It will control microorganism growth without the strong fumes and corrosive action of bleach. It will not stain or bleach most fabrics. Although there have been no reported cases of any problems, individuals with chemical sensitivities should check with their Doctor before use.

    PROPERTIES

    pH:   3.7
    Specific Gravity:   1.028
    Appearance:   Clear liquid
    Odor:   Mild
    Flash Point:   Not combustible
    DOT Shipping Label:   None

    DIRECTIONS

    "MAINTAIN C1 for FLOORS & WALLS"  is a concentrated formulation.
    Directions for use mix 2 ounces of solution with 1 gallon of tap water. This container makes 7.5 gallons of product. It is easily applied with the use of a compressed air sprayer, brush, roller or fogging device. Thoroughly saturate all areas to be treated. Depending on surface texture and absorbency, coverage ranges from five hundred to one thousand square feet per gallon of diluted solution. Do not rinse off and allow to dry. If surfaces are visibly dirty, clean first with “MOLD & MILDEW OXIDIZER”. There is no need to evacuate the premises during application.

    Safety Data
    Before using product carefully read label information and Material Safety Data Sheet

    FOR MORE INFORMATION ON
    MOLD, MILDEW, FUNGUS & 
    OTHER INDOOR AIR QUALITY PROBLEMS,
    GO TO :

    http://www.healthri.org/environment/risk/mold_indoor.htm
    http://www.epa.gov/mold/moldresources.html
    http://www.woodfloorsonline.com/techtalk/wfchecklist.html

    OTHER RELATED PRODUCTS : "MAINTAIN C1 for HVAC/R SYSTEMS

    SUGGESTED DISPENSING EQUIPMENT

    MODEL # 26 POWER FOGGER
    SPECIFICATIONS

    Motor 1 Hp., 120VAC 50/60HZ, 7 amp.   ( Optional: 240VAC. 3.5 amp )
    two - stage fan motor
    Fogging Nozzle High shear, counter-rotating vortex design
    Range & Size Visible fog 20-30 feet from end of wand
    20-35 micron ULV
    Liquid Flow Control   ON/OFF toggle valve on wand.
    Flow from ULV to Light Mist Adjustable Flow from 0-18 oz/min 2 Stage Motor Nozzle Mounted on 18" Hose
    One turn control valve
    Adjustable Flow Rate   0 - 2.5 oz. per minute
    Tank Capacity 1.5 gallon [6 liters]
    Extendable Hose Length   48 "
    Construction The handle and tank are one-piece construction
    Rotation-molded for maximum strength.


    CART SPRAYER

  • 3 Gallon Capacity with on demand electric pump

  • Consistent 40 - 60 P.S.I. During Application
        Allows Product to Fully Penetrate Coil Depth

  • Durable Chemical Resistant Hose and Valve

  • 40' Recoiling Hose

  • Dramatically Reduces Time Spent Cleaning




  • HAND HELD ONE GALLON PUMP SPRAYER

    Package
    SOLD BY INDIVIDUAL BOTTLES

    - OR -

    BY CASE LOT :

    12 / 15 oz concentrate bottles/case

    Each 15-oz. unit
    makes 7.5 gallons of
    Ready-to-Use
    "MAINTAIN C1
    for FLOORS & WALLS  "
     

    SUGGESTED DISPENSERS


    # 26 Power Fogger ( Pictured Above )

    Cart Sprayer ( Pictured Above )
    3 Gallon
    Power Sprayer Electric

    One Gallon Pump Sprayer
    ( Pictured Above )



    Website Price
    $ 699.00 per
    12 unit /case
    ( $ 58.25 per
    15 oz. unit )

    NOTE :
    Ready -to - Use
    Cost per gallon :
    $ 7.80 per RTU gallon




    $ 390.00/each



    $ 690.00/each



    $ 33.90/each






    FOR HVAC/R SYSTEMS and AIR DUCTS



    MOLD INHIBITOR

                 

  • Inhibits Microorganism Growth ...Such As Mold & Bacteria ...
      Controls the Reformation of Biofilms On Cooling Coils
    Of HVAC/R Systems And Air Ducts.


  • Reduces Frequency Of Coil Cleaning Cycle


  • Greatly Minimizes the Growth of Mold & Mildew
    on Air Conditioning Coils &  and in Air Ducts
    Dry Surfaces : Min. 2 Years
    Wet Surfaces : Approx.6 Months

  • A Post Preventative Measure
    to Inhibit and Prevent
    Mold & Mildew
    from Re-appearing


  • Increases HVAC/R System Operating Efficiency


  • Reduces System's Maintenance and Electrical Power Costs


  • Eliminates Odors Associated With Mold


  • NO Need To Evacuate Premises During Application


  • WILL NOT Stain Or Bleach Most Surfaces


  • EPA Reg. No. 67212-2


  • "GREEN": "ENVIRONMENTALLY - SENSITIVE"

    "MAINTAIN C1 for HVAC/R SYSTEMS  "  ( formerly “ MicroBiocide”  #430 )


    HVAC/R Systems :
    Air Duct Cleaning :

    Are you breathing dander, dust, pollen, mold and mildew? Your heating, ventilation and air conditioning (HVAC) systems accumulate, and become a breeding ground for, a variety of contaminants that have adverse health effects. Most people spend more than half their time inside, and yet the EPA has found that indoor air can be 70% more polluted than outdoor air. In fact, one of out six people suffering from allergies does so as a direct result of the fungi and bacteria in their heating, ventilation, and air conditioning system; and air duct system.

    Today, indoor air quality (IAQ) has become a major health concern. Indoor air pollution can lead to the serious problem of "Sick Building Syndrome"  which results in a wide range of health concerns, including respiratory disease, dizziness, eye irritation, and general fatigue. Contamination of air associated with bacteria, fungi, and mold is believed to be the primary cause of the indoor air quality problems. According to the U.S. EPA and U.S. Department of Health and Human Services, "contaminated central air handling systems can become breeding grounds for mold, mildew, and other sources of biological contaminants and can then distribute these contaminants," --and--"the heating, ventilation and air-conditioning (HVAC) system must be well maintained, inspected and cleaned on a prescheduled and periodic basis and repaired as needed. If maintenance is inadequate, problems that may arise again include growth and dissemination of microbial agents."

    HVAC system surfaces have always been point sources for microbial contamination that may degrade the indoor environment's IAQ and the interiors of these systems provide an especially favorable environment where microbial growth can expand uncontrollably into colony forming units. Cooling coils, drain pans and the fan housing assembly are the most contaminant-prone components of an air-handling unit. When mold colonies grow, they produce a sticky substance called enzyme mycelium, which traps dust particles from the air and breaksdown the trapped particles into food. By preventing the growth and establishment of colonies, the various effects caused by biological contamination in the air-handler can effectively be controlled. Controlling this contamination is essential to maintaining the quality of air inside your building.

    HVAC systems are the perfect environment for microorganisms -- such as bacteria, algae and mold -- to grow. Furthermore, HVAC systems spread these harmful contaminants, which may cause odors, damage to surfaces and toxic byproducts, to living and working environments. "MAINTAIN C1 for HVAC/R SYSTEMS  "  ( and Ductwork Systems ) controls contaminants that often cause poor Indoor Air Quality ( IAQ ) and "Sick Building Syndrome" at the source -- the HVAC system. "MAINTAIN C1 for HVAC/R SYSTEMS  "  ( formerly “ MicroBiocide”  #430 ) controls and inhibits microorganisms ( bacteria, algae, mold )that form a biofilm on cooling coils and other working parts of HVAC systems for up to 6 months. Biofilm on coils causes reduced efficiency as it interferes with the heat transfer process of the unit. "MAINTAIN C1 for HVAC/R SYSTEMS  "  ( formerly “ MicroBiocide”  #430 ) also prevents corrosion that is often caused by sulfuric acid secreted by common bacteria. Treatment of the coils with "MAINTAIN C1 for HVAC/R SYSTEMS  "  ( formerly “ MicroBiocide”  #430 ) can make systems run more efficiently and last longer...improving the overall operational efficiency of the entire system.

    The proper use of "MAINTAIN C1 for HVAC/R SYSTEMS  "  removes known biological pollutants that promote poor Indoor Air Quality from HVAC/R Systems. Cooling coils, drip pans, air intakes, insulation, and other HVAC system surfaces have alway been point sources for microbial contamination that may degrade a facility's IAQ. Controlling the amount of contamination is essential to maintaining the quality of air inside buildings.

    F.Y.I. ... All air delivered to the interior of a mechanically- ventilated building passes through an air handler. Investigative reports of indoor environmental problems have long noted that air handlers in problem buildings are almost always contaminated, often with evidence of extensive microbial growth. In most systems, air is re-circulated many times rather than being exhausted after one pass through the air handler.

    Air that passes through a contaminated air handler will pick up loose particles from the surfaces within the air handler. The more times the same volume of air passes over a contaminated surface, the greater the possibility that it will pick up contamination. The tight design of moderen buildings results in reduced exchange of air with the outdoors. Thus, the concentration of contaminated air will increase as long as air is allowed to pass over contaminated surfaces.

    In light of these facts, a fundamental requirement for achieving and maintaining an acceptable level of interior air quality is the cleanest possible interior for all air handlers in the facility. Air handlers MUST BE maintained in a clean condition and NOT be allowed to become contaminated. Maintaining an acceptable clean air handler requires 3 steps : #1)Cleaning an air handler that has become contaminated; #2) Preventing the air handler from becoming contaminated again; and #3) Identifying when contamination has begun to reoccur.

         
    Microscopic View-Mold/Dust in Air Duct                                                                                     "MicroBiocide" ® #430
                                                                                                                                                                 Top-half : Before Treatment
                                                                                                                                                                  Bottom-half : 3 mo. after treat
    "MAINTAIN C1 for HVAC/R SYSTEMS  " increases equipment efficiency and longevity. It's usage controls organisms that leave a biofilm on cooling coils and other working parts of HVAC systems. Biofilm on coils causes reduced efficiency as it interferes with the heat transfer process of the unit. Treatment of the coils with "MAINTAIN C1 for HVAC/R SYSTEMS  " can make systems run more efficiently and last longer.

    "MAINTAIN C1 for HVAC/R SYSTEMS  " has all the necessary EPA and state registrations. This use not only kills bacterial and algal growth in air-conditioning systems but inhibits new growth for as long as six months after application. Also, "MAINTAIN C1 for HVAC/R SYSTEMS  " prevents damage caused by plugged drains by eliminating slime deposits.

    PROPERTIES

    pH:   3.7
    Specific Gravity:   1.028
    Appearance:   Clear liquid
    Odor:   Mild
    Flash Point:   Not combustible
    DOT Shipping Label:   None

    DIRECTIONS :

    "MAINTAIN C1 for HVAC/R SYSTEMS  "  is a concentrated formulation. Directions for use, mix 2 ounces of solution with 1 gallon of tap water. This container makes 7.5 gallons of product It is easily applied with the use of a compressed air sprayer or fogging device. Thoroughly saturate all areas to be treated (including coils, blower assemblies, drain pans, etc.). DO NOT rinse off and allow to dry. If cooling coils are visibly dirty, they should be cleaned first with ( Related Product :) “ POWER COIL CLEAN ” ( a Non-caustic, Non-corrosive Heavy-duty coil cleaner that safely cleans and deodorizes evaporator coils, condenser coils, heating coils, window units, air filters, blowers, and other dirty HVAC/R components without damaging metal surfaces. )

    CARE OF UNIVENTS IN SCHOOL CLASSROOMS

    Under optimum conditions, the univent and exhaust ventilation create airflow in a classroom. By functioning properly, a univent providing fresh air and the exhaust vent removing stale air and pollutants can both maintain comfort within a classroom. If these systems are NOT functioning as designed, environmental pollutants and microorganisms can build up and cause Indoor Air Quality problems. The cause of lower efficiency can be attributed to lack of maintenance in the classroom or of the univent itself. Here are some tips to enhance air quality : Heavy deposits of dust on the univent filter. Filter should be either cleaned or changed on a routine basis. Upon activating “ HEAT ONLY ” univents, a stale or mold odor may be products from the unit. If the univent provides only heat, these foul odors can be an indication that rain water has penetrated into the unit through outside brickwork or window systems. Water stains in the base of the univent casing can be a sign of water pooling and potential mold growth. Under these conditions, remediate mold growth with our “ MOLD & MILDEW OXIDIZER ”. Rinse with water. Allow to dry. Then apply "MAINTAIN C1 for HVAC/R SYSTEMS  " as a preventative measure to inhibit or prevent mold growth over the next 6 months in the unit.

    If the univent also provides cooling during the warmer months and produces mold odor, this condition can indicate inadequate draining of condensate from cooling coils or chilled water supply pipes. Also, this condition most probably will create a biofilm on the coils which will affect units efficiency and increase electrical costs to operate the unit. Failure to pitch the drain pan in a univent to drain the condensate can lead to pooling water and subsequent mold growth. Uninsulated chilled water pipes outside the cooling coil chamber can result in dripping, undrained condensate and subsequent mold growth in wetted materials. Green-colored corrosion on copper pipes or rust on steel electrical components can be a sign of excessive condensation in univents. Under these conditions, remediate mold growth with our “MOLD & MILDEW OXIDIZER”. Rinse with water. Allow to dry. Next, clean and degrease coils and/or water pipes with our compatible “ POWER COIL CLEAN  ” . Rinse with clean water and wipe clean. Then apply "MAINTAIN C1 for HVAC/R SYSTEMS  " as a preventative measure to inhibit or prevent mold growth over the next 6 months in the unit.

    There is no need to evacuate the premises during application. Read label directions carefully for Air Duct application before using product .

    Safety Data
    Before using product carefully read label information and Material Safety Data Sheet

    FOR MORE INFORMATION ON
    MOLD, MILDEW, FUNGUS & 
    OTHER INDOOR AIR QUALITY PROBLEMS,
    GO TO :

    http://www.healthri.org/environment/risk/mold_indoor.htm
    http://www.epa.gov/mold/moldresources.html
    http://www.woodfloorsonline.com/techtalk/wfchecklist.html

    OTHER RELATED PRODUCTS :
    “ Power Coil Clean  ”
    "MAINTAIN C1 for Floors & Walls


    SUGGESTED DISPENSING EQUIPMENT

    MODEL # 26 POWER FOGGER
    SPECIFICATIONS

    Motor 1 Hp., 120VAC 50/60HZ, 7 amp.   ( Optional: 240VAC. 3.5 amp )
    two - stage fan motor
    Fogging Nozzle High shear, counter-rotating vortex design
    Range & Size Visible fog 20-30 feet from end of wand
    20-35 micron ULV
    Liquid Flow Control   ON/OFF toggle valve on wand.
    Flow from ULV to Light Mist Adjustable Flow from 0-18 oz/min 2 Stage Motor Nozzle Mounted on 18" Hose
    One turn control valve
    Adjustable Flow Rate   0 - 2.5 oz. per minute
    Tank Capacity 1.5 gallon [6 liters]
    Extendable Hose Length   48 "
    Construction The handle and tank are one-piece construction
    Rotation-molded for maximum strength.


    CART SPRAYER

  • 3 Gallon Capacity with on demand electric pump

  • Consistent 40 - 60 P.S.I. During Application
        Allows Product to Fully Penetrate Coil Depth

  • Durable Chemical Resistant Hose and Valve

  • 40' Recoiling Hose

  • Dramatically Reduces Time Spent Cleaning




  • HAND HELD ONE GALLON PUMP SPRAYER

    Package
    SOLD BY INDIVIDUAL BOTTLES

    - OR -

    BY CASE LOT :

    12 / 15 oz concentrate bottles/case

    Each 15-oz. unit
    makes 7.5 gallons of
    Ready-to-Use
    "MAINTAIN C1
    for HVAC/R SYSTEMS  "
     

    SUGGESTED DISPENSERS


    # 26 Power Fogger ( Pictured Above )

    Cart Sprayer ( Pictured Above )
    3 Gallon
    Power Sprayer Electric

    One Gallon Pump Sprayer
    ( Pictured Above )



    Website Price
    $ 1,320.00 per
    12 unit /case
    ( $ 110.00 per
    15 oz. unit )

    NOTE :
    Ready -to - Use
    Cost per gallon :
    $ 15.70 per RTU gallon




    $ 390.00/each



    $ 690.00/each



    $ 33.90/each





    "Mastic Remover"


    MASTIC REMOVER MASTIC REMOVER MASTIC REMOVER

    made from SOYBEANS

    EFFECTIVE ON
    WHITE & BLACK MASTIC


    "GREEN": ENVIRONMENTALLY-RESPONSIBLE"
    "Mastic Remover" is specially formulated to remove mastic/glues/and adhesives. It is effective on both white and black mastic in less than one hour. "Mastic Remover" stays "wet" and actively "removes" for over 24 hours. As a 'natural', vegetable-based product made from SOYBEANS, it provides an easy clean-up, rinsing clean with water and leaving no residues after this water rinse. Abatement contractors need NOT provide negative air since "Mastic Remover" creates NO bad odors/fumes and contains NO mineral spirits or other petroleum distillates (Flashpoint: Over 300 degrees Fahrenheit). This product DOES NOT add to HAZ-MAT and is Landfill ACCEPTABLE.

    --MINERAL SPIRITS & CITRUS SOLVENT REPLACEMENT
    --100 % BIODEGRADABLE
    --"SAFE" --IN OCCUPIED AREAS/FOR LANDFILL DISPOSAL
    --NO ODORS...NO DANGEROUS FUMES
    --NO "ODC's",  NO "HAP's",  Low "VOC's",
    ZERO VAPOR PRESSURE 
    --NON-EVAPORATIVE QUALITIES MAKE IT IDEAL FOR SAFE ASBESTOS REMOVAL.

    COVERAGE: 400-500 SQUARE FEET PER GALLON

    "SOYBEAN-BASED PRODUCTS" are made "naturally" from soybean oil, soybean derived protein, and soybean-derived vitamin E.
    Safety Data

    Package
    4/1 gallons/case
    1/5 gallon case

    Wholesale Price
    $189.40/cs
    ($47.35/gal)

    $169.70/
    5 gal pail
    ($33.94/gal)



    Website Price
    $189.40/cs
    ($47.35/gal)

    $169.70/
    5 gal pail
    ($33.94/gal)







    "Microfiber"

    COLOR-CODED
    CLEANING CLOTHS


        


    "GREEN": "ENVIRONMENTALLY-RESPONSIBLE"
    "MICROFIBER"  Defined :  Microfiber is constructed in a blend of 70/30 ratio of polyester/polyamide. "MICROFIBER" is ultra-fine manufactured fibers that have a diameter size of less than 1.0 "denier" . "Denier"   is the term used to define the diameter or fineness of a continuous or filament fiber such as silk or man-made fibers. Micro fibers are one hundred times finer than a human hair, up to thirty times finer than cotton fiber, and forty times finer than wool. There are 88 miles of microfiber in one square inch of cleaning cloth.

    "MICROFIBER CLOTHS"  hold up to 7 times their weight in liquid, dirt, and grime. Used dry, the electrostatic properties of microfiber attract and hold dust. Used dry or slightly damp, "MICROFIBER CLOTHS"  are the definitive "Dusting Rag" for a "Cleaning Professional" .Clean soiled surfaces with a wet "MICROFIBER CLOTH". For windows and other shiny surfaces, use a WET "MICROFIBER CLOTH" followed by a DRY "MICROFIBER CLOTH". "MICROFIBER CLOTHS"  can be used wet, dry or damp; with or without cleaning agents.

  • Microfiber cloths are hypoallergenic, thus not creating problems with those suffering from allergies or asthma.

  • Microfiber cloths are super absorbent, absorbing over 7 times it's weight in water.

  • Microfiber cloths and mops are 99.94% effective in removing bacteria from smooth surfaces, as compared to conventional cloths and mops used with "Lysol" or Bleach, which were only 91.89% effective.

  • Microfiber cloths are over 4 times more effective than ordinary cleaning cloths. They're more plush and longer lasting than other cleaning products because they contain more than 200,000 fibers per square inch of product.

  • Microfiber cloths dry in 1/3 the time of ordinary cleaning cloths.

  • Microfiber cloths are lint free and non-abrasive.

  • Microfiber cloths can be reused hundreds of times.

  • Microfiber products do not negatively impact the shine value of the surface being cleaned.

  • Microfiber mops allow a greater area to be cleaned than conventional mops, and microfiber mops are 5 times less expensive to clean.

  • There is a reduced chance of slip and fall accidents since the surface being mopped dries faster than traditional mopping.

  • Microfiber cloths are environmentally friendly .


  • AVAILABLE COLORS : "GREEN"; "BLUE"; "RED"; and "PURPLE"

    NOTE : MicroFiber Cloths matches the Color-Coded R.T.U. Products in our "Multi-tasking Cleaning System".Match a Color with a Cleaning Function for Optimum Cleaning Efficiency .

    Safety Data

    Package
    12 Cloths / Package

    Wholesale
    Price

    $29.85/package
    ( $2.20 per cloth )

    Website
    Price

    $23.88/package
    ( $1.99 per cloth )





     "Mineral X" 

    RUST, SCALE, AND MINERAL CLEANER

    "GREEN": "ENVIRONMENTALLY-RESPONSIBLE"

    SAFE REPLACEMENT FOR
    PHOSPHORIC ACID
    READY-TO-USE


    "MINERAL X"  is a Safer Alternative to Acid-Based Mineral Cleaners "MINERAL X" is a unique blend of organic salts and degreasing agents effectively removes iron and mineral deposits, rust and soap scum without the harshness of other acid-based mineral cleaners. Specifications: Not regulated for shipping, handling or storage. Biodegradable and nonfuming. Noncorrosive to skin. Green Seal Compliant . powerful, reduced toxicity alternative to acid-based mineral cleaner.
    Works better than phosphoric acid!

    BENEFITS :

    CLEANS:
  • Hard Water

  • Lime
  • Metal Oxides
  • Milk Residues
  • Mold &  Mildew Stains
  • Rust

  • Scale

  • Soap Scum

  • Urine Salts


  • USE ON : Ceramic Tile, Grout, Stainless Steel, Aluminum, Copper, Brass, Concrete, Terrazzo, Porcelain, Brick, Glass, and Fiberglass .

    AS A CONCENTRATE...Use at FULL-STRENGTH for tough stains and DILUTED with water for use on lighter soils.

    "MINERAL X"  is a unique, reduced toxicity combination of organic salt and safe degreasing agents.
    Removes hard water stains and iron deposits WITHOUT damage to skin or surfaces.
    It is biodegradable, non-corrosive to skin, non-fuming, and will not pit, streak or blacken stainless or aluminum.

    "MINERAL X"  is non-regulated for shipping, handling and storage.

    Package
    6 Quarts w/ Triggers-1/2 cs

    12 Quarts w/ Triggers/cs

    Refill Pak : 4 gallons per case



    Wholesale Price
    $ 39.64 /
    6 qt./- 1/2 cs.

    $ 75.50 /
    12 qt./cs.

    $ 61.76 /
    4/1 gal.



    Website Price
    $ 31.71 /
    6qt-1/2cs

    $ 60.40 /
    12 qt./cs.

    $ 49.41 /
    4/1 gal.








    MINERAL SPIRITS REPLACEMENT


    BEAN-a-doo


    made from SOYBEANS

    "GREEN": "ENVIRONMENTALLY-RESPONSIBLE"
    "BEAN-a-doo" ™  is made naturally with "SOY SPIRITS" ® (a mineral spirit replacement made from soy esters and soybean oils). It is a multi-purpose solvent cleaner which is ideal for removing tar, grease, ink, oil, and other petroleum-based substances. "BEAN-a-doo" ™ contains NO hazardous ingredients and releases NO dangerous fumes.
    NO P.H.       NON-T0XIC       100 % BIODEGRADABLE      
    NON-EVAPORATIVE       RECYCLABLE
    PLEASANT "NATURAL"AROMA
    ECONOMICAL: 1/4 oz. of "BEAN-a-doo" ™  = equals = 
    6-9 oz. of mineral spirits.

    NOTE: "BEAN-a-doo" ™  IS a mineral spirits replacement for cleaning and removal purposes ONLY. However, it should NOT be used as an additive or thinning agent.
    Safety Data

    Package (bulk liquid concentrate)
    4/1 gallon case
    Wholesale Price
    $107.80/cs
    ($26.95/gal)

    Website Price
    $107.80/cs
    ($26.95/gal)





    "Minerals, Volcanic" 
    for Deodorization

    Volcanic Crystals Volcanic Crystal Odor Eliminators
    UNSCENTED/NON-CHEMICAL/
    NATURAL ODOR ELIMINATORS


    (FOR PRICING, GO TO :
    "VOLCANIC DEODORIZING MINERALS" 
    under 'V' )


    "GREEN": "ENVIRONMENTALLY-RESPONSIBLE"

    "Volcanic Deodorizing Minerals" are all-natural, odorless, non-toxic volcanic crystals which captures unpleasant odors through its "negative" ionic charge. Generally, all odors are positively-charged gases that float in the air like dust particles. The negative charge of the volcanic minerals "traps" the positively-charged undesirable odor particles. This process is similar to a piece of metal being attracted to a magnet-the minerals attract and hold foul odors making the air smell fresh. Once attracted, the particles become trapped within the million of microscopic channels contained within these volcanic minerals.

    These "Volcanic Deodorizing Minerals"  will remove unpleasant cooking odors from kitchens, especially strong smelling foods such as fish, onions, and broccoli ; smoke odors from cigars, cigarettes, fireplaces, and wood-burning stoves; musty odors in basements, garages, and closets; pet odors from litter boxes, pet beds & cages, and pet accidents; or any other undesirable odors. These odor eliminators will keep cars, trucks, boats, and RV interiors smelling "fresh and clean".

    TO USE : Simply place the netted bag containing the crystals in any area where undesirable odors exist. In 8 to 12 hours ODORS ARE GONE !

    FILTERS AIRBORNE BACTERIAL ODORS,
    MAKING AIR CLEANER AND HEALTHIER.

    MAKES CLOTHES IN CLOSETS SMELL FRESH & CLEAN .


    2 lb. bags are Effective in a Space up to 600 square feet.
    Available In 2 LB. PACKAGE :
    "BASEMENT & GARAGE ODOR ELIMINATORS"
    "CAR, TRUCK, RV, and BOAT ODOR ELIMINATOR"
    "CLOSET ODOR ELIMINATOR"
    "COLLEGE DORMITORY ROOM ODOR ELIMINATOR"
    "KITCHEN ODOR ELIMINATOR"
    "PET ODOR ELIMINATOR"
    "SMOKE ODOR ELIMINATOR"

    8 oz. bags are Effective in a Space up to 300 square feet.
    Available In 8 OZ. PACKAGE :
    "CAR, TRUCK, RV, and BOAT ODOR ELIMINATOR"
    "CLOSET ODOR ELIMINATOR"
    "FRIDGE & FREEZER ODOR ELIMINATOR"
    "LOCKER/ATHLETIC BAG ODOR ELIMINATOR"

    RECHARGEABLE After 10 months, leave the volcanic minerals in its mesh bag in sunlight for 6 hours. This simple procedure will negatively recharges these volcanic minerals making them an economical odor-controlling tool that can be re-used over and over again.

    Keep "Volcanic Deodorizing Minerals" in your kitchen, basement, car, or any other area where odors linger. These Volcanic Minerals will rid any space of unpleasant odors.

    100 % ODORLESS...NO PERFUMES OR COVER-UPS
    ALL NATURAL
    "NON-TOXIC"
    KEEPS AIR FRESH!

    Safety Data




     

    "MIX"
    -N-
    "MATCH"

    "GREEN"
    "Environmentally-Sensitive"

    "GREEN": ENVIRONMENTALLY-RESPONSIBLE"

    ORDER SMALL QUANTITIES

    MOST INDIVIDUAL GALLONS AND/OR BOXES REPRESENT A 2 MONTH SUPPLY OF CLEANERS

    WE CORDIALLY INVITE YOU TO VISIT OUR e-STORE !

    DOWN OUR "GREEN"SUPERMARKET AISLE!


    Our 'MIX-N-MATCH' PURCHASING POLICY  allows YOU, our valued customer, to purchase a variety of different products in small quantities. If the old saying,"VARIETY IS THE SPICE OF LIFE", is TRUE...
    then you'll REALLY enjoy taking advantage by "MIXING" & "MATCHING" our "GREEN" ENVIRONMENTALLY-RESPONSIBLE PRODUCT LINE to protect your family's needs and provide a healthier environment in your home !!






    MOLD/MILDEW INHIBITOR
    A Preventative Measure

              

    "MAINTAIN C1" :

    ( Click Here ) More Information On :
    "MAINTAIN C1 for Floors & Walls


    ( Click Here ) More Information On :
    "MAINTAIN C1 for HVAC/R SYSTEMS


  • Controls  & Inhibits
    The Growth of Active Microorganisms
    such as
    Mold, Mildew, Algae, Bacteria,
    and other Biofilms


  • Greatly Minimizes the Growth of Mold & Mildew

  • Inhibits and Prevents
    Mold & Mildewfrom Reappearing

    ( FOR PRICING, GO TO :
    " MAINTAIN C1 " ...under 'M'. )



    ENVIRONMENTALLY RESPONSIBLE
    100 % BIODEGRADABLE


    "MAINTAIN C1" controls and inhibits the growth of a broad spectrum of microorganisms -- such as gram positive and gram negative bacteria, algae, mold & mildew and fungi -- in wall and ceiling spaces, especially after roof leaks and wall seepage; and on cooling coils and other working parts of HVAC/R systems.

    As an inhibitor, "MAINTAIN C1" disrupts the reproductive cycles of these microorganisms and disallows them to further reproduce. Without reproduction capabilities, the microorganism ultimately completes its life cycle without further spore generation and remediates itself.





    "MOLD & MILDEW
    ODOR REMOVAL "


    MOLD & MILDEW REMOVAL Mold & Mildew Odors

    DEODORIZER CONCENTRATE
    "Nok-im'-ded" ™ 


    made from
    AUSTRALIAN TEA TREE OIL
    -and-
    EUCALYPTUS OIL


    (FOR PRICING, GO TO :
    "Nok-im'-ded" under 'N' )

    "GREEN": "ENVIRONMENTALLY-RESPONSIBLE"

    BACKGROUND :  "Nokimded"™    is an amazingly unique concentrated deodorization product for the carpet and fabric industry consisting of tea tree and eucalyptus oils from Australia. The basis for "Nokimded"™  is revolutionary extracts from the famous "TEA TREE" (melaleuca alternifolia), a member of the Myrtaceae found in Northern New South Wales Australia. There are over 300 varieties of "TEA TREE"  throughout Australia but ONLY this one boasts of "amazing" powers. This "TEA TREE"  OIL , according to precedence , provides anti-septic , germicidal , anti-fungal , and anti-bacterial immune boosting qualities that may be applied to a variety of health conditions. "TEA TREE"  OIL was used by Aborigine tribes for thousands of years as a healing plant when its leaves were crushed into mudpacks to cuts and skin infections. Myths tell of a "magical" healing lagoon , in which the local tribe bathed as a treatment for wounds , burns and other ailments. In fact , it was a pond into which tea tree leaves had fallen , creating a naturally antiseptic bath.

    Famous British explorer Captain Cook discovered "TEA TREE" in 1770 when he and his men brewed the leaves of the tree to drink to prevent scurvy. Although it proved ineffective on scurvy , he returned home with his new discovery but it's merits was discounted by medical experts at the time. As early as 1923, Australian scientific evidence began to substantiate the "TEA TREE's" antiseptic and bactericidal properties. It's  "cure-all" effects made it standard issue in the first aid kits of the Australian Army and Navy during World War II . In 1933 , the British Medical Journal reported that "TEA TREE"OIL was "a powerful disinfectant-non poisonous and non-irritant ." By 1955 , the United States Dispensatory stated that "TREE TEA" OIL was actively germicidal..."with an antiseptic action 11 to 13 times that of carbolic acid." Recent research has even discovered that "TREE TEA" OIL can fight Methicillan-resistant Staphylcoccus aureus (M.R.S.A.-the so-called, hospital killer bug).

    The continent of Australia is the largest "TEA TREE" supplier in the world. "TEA TREE"  OIL is a complex substance made up of almost 50 chemical compounds. The OIL CLAIMS To Have 4 MAIN FUNCTIONS:
    • #1) Acts as a BACTERICIDE/ANTISEPTIC
    • #2) Acts as a ANTI-FUNGAL AGENT
    • #3) Acts as a VIRUCIDE (can kill certain viruses); and
    • #4) Naturally boosts the body's IMMUNE SYSTEM !
    According to some experts, "TEA TREE" OIL is the strongest, natural antiseptics known to "man". It's 4-5 stronger than usual household disinfectants. A 1% solution in laundry water is known to kill dust mites, whose presence is known to cause "asthma" and other respiratory irritations in people. Additionally, "TEA TREE" extract is the key ingredient to provide "Nokimded"™  with the "POWER" as an effective DEODORIZER  and CARPET SOLUTION TANK ADDITIVE  in  'clean'  and  'unsanitary' water  and  'fire restoration'  applications.

    Unfortunately, the exorbitant expense of registering this type of product with the FEDERAL   E.P.A.   prohibits the use of any cleaning or chemical term other than "DEODORANT" to be legally applied to this product in many instances.


    "Nokimded" ™   DEODORANT --- U.S. Patent # : 6 , 019 , 963 -- 
    --USES   AUSTRALIAN   PLANT   OIL   EXTRACTS
        ----RESTORATION   STRENGTH
          -------CONCENTRATED  ECONOMY

    The NOSE Knows! is a highly concentrated deodorizer derived from 'NATURAL' TEA TREE & EUCALYPTUS OILS. This product contains NO  Synthetic -or- Masking Perfumes to counter the offensive source of the foul odors. All odor dispersing agents in "Nokimded" ™
    DEODORANT
    are essentially 'NATURAL' and 'BIODEGRADABLE'. It's odor-neutralizing formulation disperse malodors under many various circumstances such as : a carpet exposed to water from storm , flood , overflow , or pipe breakage which takes on "a musty smell" from mold & mildew growth ; a carpet contaminated by pet urine or feces ; and/or a fire-damaged building or home overcome by a strong smell of smoke. Further, this  'NATURAL'  and 'NON-HAZARDOUS' Deodorizer  upon  usage DOES NOT  effect stain resistance through chemical fiber protection of treated fabrics or carpeting.

    "Nokimded" ™  DEODORANT  can be applied with pressure , pump-up , or electric sprayers ; water-based foggers ; sponge ; or injection type applications.

    EFFECTIVE AFTER : Fires ; Floods ; Musty Mold & Mildew Odors ; Pet Mishaps; Sewer Back-ups.
    EFFECTIVE IN : Autos ; Barns ; Bathrooms ; Cafeterias ; Cars ; Closets ;
    Gymnasiums ; Health Care ; Hospitals ; Garages ; Hotels ; Infant/Invalid
    Care ; Lockers ; Motels ; Planes ; Restaurants ; Sheds ; Shower rooms ;
    Shuttles ; Storage Facilities ; Trucks ; Trains .
    EFFECTIVE ON : Carpets ; Ceilings ; Clothing ; Drapes ; Floors;
    Furniture ; Drywall ; Insulation ; Mattresses ; Padding ; Plaster;
    Upholstery ; Walls

    USAGE:
    (TEST IN A SMALL , INCONSPICUOUS AREA
    BEFORE ANY MAJOR USAGE)
    General & Laundry Deodorization :
    Mix 8 oz. of "Nokimded" ™   Concentrate into
    one gallon (128 oz.) of water.

    Carpet Treatment : Pre-spray ; Truckmount Slurry ;
    Clean Water Restoration --

    Mix 16 oz. of "Nokimded" ™   Concentrate into one gallon (128 oz.)
    of water , apply , wait 10 minutes , and extract.

    Water & Fire Damage ; Unsanitary Water Restoration --
    Mix 32 oz. of "Nokimded" ™   Concentrate into one gallon (128 oz.)
    of water , apply , wait 10 minutes , and extract.

    Boosting/Deodorizing Carpet Extraction Treatment :
    Dilute Carpet Extraction Treatment with water into solution tank as per label directions. Add 1 to 2 oz. of "Nokimded" ™   Concentrate to pre-mixed carpet cleaning solution. THIS REAL TIME-SAVER will clean and deodorize in ONE-STEP!

    • Formulated with tea tree oil direct from Australia

    • This ancient mystic ingredient is recognized world-wide for its
      anti-microbial qualities.

    • Amazing deodorizing capabilities without heavy chemical
      after-smell.

    • Used especially for: mold & mildew odors , urine smells ,
      water & fire damage odors ; and GENERAL DEODORIZING.

    FEATURES :
    **Appearance : CLEAR          **Odor : FRESH, CLEAN
    **P.H. : NEUTRAL                  **Specific Gravity : 1.00
    **Flash Point : NONE             **Biodegradable : YES

    Safety Data

    Package (Liquid Concentrate) : 1/55 gallon drum ;
    1/5 gallon pail ; 4/1 gallon case ; 12/16 oz. pint case





    "MOLD & MILDEW CLEANING
     & REMEDIATION"
    MOLD & MILDEW REMOVAL



    ABOUT MOLD & MILDEW
    Mold and mildew are vegetative growths, and NOT a type of dirt to be cleaned. It is produced by a tiny plant of the fungus family. It can sprout on most surfaces especially if a food source is present for the minifungus to thrive on, especially on paper and wood. Additionally, mildew can grow on the dirt and soil on them, especially in dampness. Mold spores (seeds) exist everywhere and will grow when the conditions are right. Mold, mildew, and bacteria are common occurrences following floods and water damage. The optimal conditions for growth are 77-88 degree Fahrenheit temperature; moisture-70-98% relative humidity; dark and poorly ventillated environments. If unaddressed properly, this condition can lead to sanitation and health problems including allergies, rashes, eye reddening, swelling, respiratory problems, headache, and general fatigue.

    Approximately 70,000 species of fungi (molds,yeasts, mildews) have been identified, and some experts suggest that the total number of species present in the environment at all times may exceed one million. While nearly all fungi can cause allergies in humans through spore releases, only about 100 species appear to be potentially pathogenic (disease causing) to humans. Exposure to various fungi may result in adverse health effects including allergy responses (hay fever, allergic rhinitis, skin and upper respiratory tract irritation, hypersensitivity pneumonitis); and infectious diseases (athlete's foot, yeast infections, histoplasmosis, aspergillosis). Many of the symptoms associated with exposure to pathogenic molds appear to primarily affect immuno-compromised individuals such as infants, young children, the elderly, people recovering from serious illnesses, and HIV/AIDS persons. Dangers to exposure include infections (especially of the respiratory system); severe respiratory failure, and hemosiderosis/death!

    Fungi are found everywhere in the environment. Both in outdoors and indoor environments --no matter how effective your HVAC system operates) . Fungi generally break down organic matter, such as wood (cellulose), absorbing or eating the nutrition. The "earthy" , musty smells of fungi are the effects of released VOCs (volatile organic compounds), some of which are known to cause irritation and upper respiratory tract problems, as well as certain cancers where exposure occurs constantly and over an extended period of time.

    Types of fungi frequently found in outdoor and indoor air are: (common) Cladosporium, Penicillium, and Alternaria species. Several uncommon pathogenic species of fungi are found on occasion in indoor air, and may include Aspergillus niger, Aspergillus fumigatus, Aspergillus flavus, and Stachybotrys atra. All fungi are of health concern whether they are viable (able to grow, releasing spores) or non-viable (essentially dead, creating dust).

    Like a weed growing on your front lawn, mold and mildew must be killed by an effective, acknowledged, E.P.A. registered disinfectant/sanitizing cleaner. The Environmental Protection Agency oversees and tests all chemicals which makes claims to kill any living organism such as insecticides, herbicides, algaecides, sanitizers, disinfectants, and rodenticides. An E.P.A. registration number on the label attests to the fact that if the product is used exactly as directed, that the desired results will have the least amount of harm to the environment when applying the product properly .

    Mildew odors throughout an enclosed area are caused by the biological functions of these "live"  organisms. Unless these live organisms, as the SOURCE of the odor, are eliminated, the mildew odor will remain and permeate every nook and cranny of the environment.

    FACTORS TO CONTROL MOLD & MILDEW!

    For fungi to grow or flourish, several key elements are necessary, including:

    a) The presences of spores (everywhere in the environment);
    b) Water (moisture) availability (both in materials and in the air)
    The optimal conditons for growth is moisture between 70-98% relative humidity;
    c) Food Sources (such as wood, paper, ceiling tiles, drywall, etc.)
    d) Appropriate temperature (various requirements depending on species) The optimal conditions for growth are 77-88 degree Fahrenheit temperature;
    e) Presence of competing organisms (bacteria or other fungal species);
    f) Amount of Light (varying requirements depending on species)   Fungi flourish in dark and poorly ventillated environments.; and
    g) PH of material.

    Finally, changing the contributing factors in the environment will impact the chances of mildew returning and flourishing and the potency of it's "musty"  smell. You may find success in controlling the potential growth of fungi by decreasing the humidity and increasing the air circulation (with air conditioning or de-humidification) and lighting (leave lights on day and night) in the area. By eliminating as many "causes"  of fungi (as mentioned above) in the affected areas , the re-appearance of mold &  mildew; and it's detrimental effects should be reduced considerably.



    STEP 1 :

     
    Clean and remove excessive soils and visible mold with "HydroxiPro" -an Oxidizing Cleaner with Stabilized Hydrogen Peroxide ( H2O2 ) with similiar properties to Chlorine Bleach ( without the health and environmental impact ) ! Soil Removal is important since dirt serves as a food source for mold ; and may trap mold spores beneath unclean surfaces . Additionally, the surfactants in "HydroxiPro"  "lifts" the existing clinging dirt and mold from most surfaces for easy removal than most competitive products . Just spray on , allow solution to sit for 5-10 minutes;... and let the oxidizing effect do all the work . Allow surface to air dry ! ( MORE INFO ) 



    STEP 2 :

    Vacuum treated surfaces with a Certified H.E.P.A. Vacuum to remove ALL loose debris from surfaces .
    Keep Vacuum Head 1"-2" from surface to avoid scratching .



    STEP 3 :

    Apply "BENEFECT"-an E.P.A. Registered, Ready-to-Use, Botanical Disinfectant--either with a Pump Sprayer -or- an Electric Fogger-- which makes "Fungi Kill Claims" on its label . Allow disinfectant to dwell onto surface for 15 minutes for thorough "kill". ( MORE INFO ) 



    STEP 4 :

    Scrub and rinse surface with clean water and a Microfiber Cloth . Allow surface to remain dampened
    ( for STEP 5 : ); or completely dry ( if STEP 5 : is omitted ) . ( MORE INFO ) 



    STEP 5 :

    Apply "MAINTAIN C1 for FLOORS & WALLS  " 
    PREVENTATIVE MICROORGANISM  INHIBITOR

    100 % BIODEGRADABLE


    An Inhibiting Agent EXCLUSIVELY for Use on FLOORS / WALLS; and
    in HVAC/R & Air Duct Systems . As a "Preventative Microorganism Inhibitor",
    "MAINTAIN C1 for FLOORS & WALLS  " Controls & Inhibits
    The Growth of Active Microorganisms such as Mold, Mildew, Algae, Bacteria,
    and other Biofilms .

    It's Use Greatly Minimizes the Growth of
    Mold & Mildew in Air Ducts & Wall/Ceiling Spaces
    Dry Surfaces : Min. 2 Years
    Wet Surfaces : Approx.6 Months

    This product serves as a Post Preventative Measure to Inhibit and Prevent
    Mold & Mildew from Reappearing .

    "MAINTAIN C1 for FLOORS & WALLS  "  disrupts the reproductive cycles
    of these microorganisms and disallows them to further reproduce. Without reproduction
    capabilities, the microorganism ultimately completes its life cycle without further
    spore generation and remediates itself.

    For More Information , Click Here :
    MAINTAIN C1 for Floors & Walls 


    More Information , Click Here :
    MAINTAIN C1 for HVAC/R & Air Duct Systems 







    "Mosquito, Flea , &  Tick
    Natural Suppressant"




    GUARDS YOUR OUTDOOR ENVIRONMENT
    AGAINST THE MOST HARMFUL
     & 
    ANNOYING INSECTS
    SIMULTANEOUSLY !

  • FLEAS

  • MOSQUITOES

  • TICKS


  • "GREEN": "ENVIRONMENTALLY-RESPONSIBLE"
    Due to the Safe, Natural Ingredients of "Mosquito, Flea, & Tick Natural Suppressant" , this product is EXEMPT from EPA registration under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA).

    FREQUENTLY ASKED QUESTIONS : QUESTION : What NATURAL Ingredients make up "Mosquito, Flea, & Tick Natural Suppressant" ?
    Answer : Active Ingredient : Garlic ( Alium sativum )( 18% )
    Inert Ingredients : Yucca Schidegera ( 42% ), Castor Oil ( 30% ), and Vinegar( 10% ).

    QUESTION : How does Mosquito, Flea and Tick Defense work?
    Answer : Mosquito, "Mosquito, Flea, & Tick Natural Suppressant" works by providing a "Residual Insect Shield"  that becomes increasingly effective after multiple applications . Repeated applications alters the Outdoor Eco-system in order to develop an inhospitable environment for a variety of harmful & annoying insects.

    QUESTION : How long does "Mosquito, Flea, & Tick Natural Suppressant" last ?
    Answer : One application will be effective for up to ( 4 ) weeks, and will vary depending on many environmental factors.

    QUESTION : Why is "Mosquito, Flea, & Tick Natural Suppressant" last different than conventional products? Answer : Many other products are harmful if inhaled, harmful if absorbed through the skin and contain hydrocarbon propellants. Since many of these products are applied as a fog-mist, it is difficult not to get them on your skin or breathe the vapors. "Mosquito, Flea, & Tick Natural Suppressant"  is all natural, non-toxic, safe and effective.

    QUESTION : The spray smells strongly of garlic. Will this odor go away?
    Answer : This odor will abate almost completely within an hour after spraying. You may smell a very mild odor for several weeks. This is the residual shield working.

    QUESTION : How do I apply "Mosquito, Flea, & Tick Natural Suppressant" ?
    Answer : It is best to begin applications in the spring, before the presence of the offending insects is detected. The preferred method of application is with a standard pump sprayer with a fine spray nozzle -or- an adjustable sprayer which attaches to a hose . Shake well, then mix 1.5 oz. of product with each (1) gallon of water. With nozzle about 6-8 inches above the grass, use a sweeping motion to spray downward into the grass. Do not spray during the heat of the day. Spray early to mid-morning, or early evening. For best results, spray all of the surrounding environment including trees, shrubs (get under and inside), non-sunlight areas like accesses to crawl spaces and basements, patios and decks, and up sides of structures about 3-4 feet. Repeat application within 10 days of first application, then repeat every 2-4 weeks depending on mosquito activity observed.

    QUESTION : It rained within a few hours after I sprayed my yard. Do I need to reapply?
    Answer : If rain occurs within 24 hours after application, Mosquito, Flea and Tick Defense will still have a residual effect, but the area may require re-spraying depending on mosquito activity observed.

    QUESTION : I saw mosquitoes in the area I just sprayed. Is it not working?
    Answer :"Mosquito, Flea, & Tick Natural Suppressant"  creates a residual shield or barrier. It is not intended to be used as a knock-down-kill product. You may still observe the presence of the offending insects during the time that this product is transforming the environment, making it inhospitable to them.

    QUESTION : Is it safe to apply in my garden?
    Answer : Yes. "Mosquito, Flea, & Tick Natural Suppressant"  is appropriate for use in your garden.

    QUESTION : I have children and a dog. After I have sprayed, how long should I wait until they can play in the yard again?
    Answer : "Mosquito, Flea, & Tick Natural Suppressant"  is safe and non-toxic and can be used in areas where children and pets will be.

    QUESTION : How much area does a 32 oz. bottle cover?
    Answer : Each 32 oz. concentrated bottle, when mixed with water, will make approximately 25 gallons. This will cover a 37,000 square foot area. Depending on the size of the area treated, one bottle should provide several applications .

    QUESTION : I have a pond on my property stocked with fish. Will Mosquito, Flea and Tick Defense adversely affect the fish and other wildlife in and around the pond?
    Answer : No. "Mosquito, Flea, & Tick Natural Suppressant"  is safe for use around ponds, streams and other water areas. These areas breed mosquitoes and it is important to spray these areas regularly.

    QUESTION : Can I spray before or after I spread fertilizer on my lawn?
    Answer : Yes.

    OUTSTANDING FEATURES :
    • NON-POISONOUS
    • SUPPRESSES MOSQUITOES, FLEAS, & TICKS SIMULTANEOUSLY !
    • TREATS TURF, PLANTS, SHRUBS, AND FLOWERS
    • TREATMENT LASTS UP TO 4 WEEKS
    • ONE 32 oz. CONCENTRATE TREATS 37,000 SQ. FT.
    • WILL NOT HARM CHILDREN, PETS, OR VEGETATION.
    Safety Data

    Package
    ( Concentrated Liquid )
    6/32 oz.

    SOLD IN CASE LOTS ONLY

    Wholesale Price
    $247.50/cs
    ($41.25/ea. unit)

    Website Price
    $198.00/cs
    (33.00/ea. unit)






    "Moth.Away"



    HERBAL MOTH REPELLANT
    Natural Herbal Formula
    Mint-Fresh Scent


    "I.P.M. ( INTEGRATED PEST MANAGEMENT ) Friendly "  :
     A "MINIMUM RISK PESTICIDE " Product Providing an EFFECTIVE & ENVIRONMENTALLY SENSITIVE APPROACH
    to Pest Management



    Adult cloth moths DO NO damage to garments and other textile items -- except to leave behind their eggs from which the hungry larvae hatch . Clothes moth larvae feed on wool, feathers, fur, hair, leather, lint, dust, paper, and occasionally cotton, linen, silk, and synthetic fibers. They are especially damaging to fabric stained with beverages, urine, oil from hair, and sweat. Most damage is done to articles left undisturbed for a long time, such as old blankets, wool upholstery, feathered hats, antique dolls and toys, natural bristle brushes, weavings, wall hangings, piano felts, old furs, and especially wool carpets under heavy furniture and clothing in storage. Damaged fabrics have holes eaten through them by small, white larvae and often have silken cases, lines of silken threads, and fecal pellets over the surface of the materials. Moths are destructive during the larvae stage. Adult "millers" or moths are entirely harmless.

    "MOTH.AWAY" is an environmentally-responsible method of moth prevention and contains NO toxic chemicals."MOTH.AWAY"  protects and freshens clothing with its unique herbal formula. It has a pleasant minty scent that leaves all garments, blankets, and linens smelling fresh all year long. These naturally blended sachets are made entirely of herbs and spices to protect your valuable clothing and woolens from moth damage. Unlike mothballs, they leave clothes smelling fresh and ready to wear. No need to dry clean or air out clothes after storage. For closets, blanket chests, or sweater boxes. Made from rosemary, peppermint, thyme, and cloves, each sachet works for a full year.

    Use "MOTH.AWAY" in all types of enclosed storage units where clothes are stored such as :
  • DRAWERS
  • GARMENT BAGS
  • STORAGE CHESTS
  • LINEN CLOSETS
  • BLANKET BAGS
  • WARDROBES
    ( note : applications will NOT be effective in open air storage areas
    such as shelves and closets )

    DIRECTIONS FOR USE :
    Apply "MOTH.AWAY" at the rate of 4-5 grams per cubic foot of storage space. Two ( 2 )-- 2.5 gram sachets is good for a 1 cubic foot.

    ACTIVE INGREDIENTS :
    Peppermint...............39.5%
    Rosemary.................39.5%
    Thyme....................19.0%
    Cloves...................2.0%


    PROVEN EFFECTIVE: "MOTH.AWAY" has been proven effective through independent laboratory tests and in-home use. Its natural, powerful formulation protects fine natural fabrics from moth damage.

    NOTE :  Before storing for the first time, ALWAYS dry clean articles to ensure that there are no moth larvae present in the fibers. An occasional squeeze of the sachet will renew the fresh, minty scent. "MOTH.AWAY"  should be replaced every few months, or once the intensity of the herbal aroma weakens.

    Safety Data
  • Package
    One ( 1 ) Case
    12 boxes/24 sachets per box
    Each sachet contains 2.5 grams
    of Herbal Formula

    MINIMUM ORDER :

    1/2 ( 6 boxes/24 sachets) Case TRIAL PAK

    Wholesale Price
    $ 93.24/case
    ( $7.77/box )

    $ 49.32/p 1/2 cs
    ( $8.22/box )
    Website
    Price

    $83.88/ case
    ( $6.99/box )

    $ 44.40/p 1/2 cs
    ( $7.40/box )




    MULTI-PURPOSE
    CLEANING SYSTEM

    "ECOgent"


    One Product CLEANS ALL with
    Low Potential for Environmental Illness
    and Endocrine Disruption


    ( FOR PRICING, GO TO : "ECOgent" under "E" )

              

    Can Be Used As
    A Baby - Safe
    Carpet Shampoo


  • ONE PRODUCT PERFORMING MANY FUNCTIONS
    including, but NOT Limited to :
    All-Purpose Cleaning; Carpet Care;
    Damp Dusting; Floor Cleaner;
    General-purpose Cleaning; Glass Cleaning;
    Heavy-duty Degreasing;
    Laundry; Soap Scum Removal;
     &  Truck Washing


  • UNSCENTED...
    A Product Designed Specifically for
    Multiple Chemical Sensitivities Sufferers


  • "GREEN": "ENVIRONMENTALLY-RESPONSIBLE"
    CERTIFIED 100 % ALL-NATURAL


    *As an Ecological Cleaning Agent , Meets Environment Canada's Environmental Choice Criteria PRC-097 "Certified Cleaning Product with Low Potential for Environmental Illness and Endocrine Disruption".

    "ECOgent"  cleaner meets or exceeds ALL PRC-097 criteria. It embodies all the right principles - being renewable, low toxic, low volatile, and readily biodegradable under both aerobic and anaerobic conditions. A key factor of this innovative techology is that cleaning ingredients are derived from vegetable matter through fermentation processes.

  • Made from 100 % natural ingredients derived from renewable resources
  • Does NOT contain petrochemicals, phosphates, EDTA, NTA, dyes, synthetic perfumes, preservatives, or pesticides

    ... And it is so low in volatiles and is unscented that "ECOgent" has been recommended by M.C.S. ( Multiple Chemical Sensitivities) sufferers.

    Especially with infants, toddlers, and young children, general purpose cleaners used for daily cleaning should be certified or meet the criteria under Environmental ChoiceM Certification Criteria PRC-097 "Cleaning Products with Low Potential for Environmental Illness and Endocrine Disruption".

    Under PRC-097, certified cleaners must:
    *Meet or exceed government and industry safety and performance standards
    *Meet the requirements of all applicable government acts, bylaws and regulations including the Fisheries Act and the Canadian Environmental Protection Act
    *Clean common hard surfaces effectively
    *Not require poison labeling under the Hazardous Products Act
    *Be accompanied by detailed instructions for proper use to maximize product performance and minimize waste
    *Be labeled for use with tepid water when diluted
    *Not be formulated with phosphates, NTA, EDTA, APEOs, organic ingredients which are bioaccumulating or potentially bioaccumulating
    *Not contain chemicals which are proven or probable carcinogens
    *Not contain halogenated organic solvents or butoxy-ethanol
    *Not use ethylene oxide in the manufacture of the whole formula or any component
    *Not contain volatile organic compounds (VOCs) exceeding 0.05% by weight
    *Be readily biodegradable under both aerobic and anaerobic conditions
    *Be nontoxic to aquatic life by whole formulation short-term sensitive toxicity tests
    *Have a calculated oral rat toxicity of LD50 > 5000 mg/kg by whole formulation test
    *Demonstrate minimum potential for introduction of endocrine disrupting by-products into the receiving environment, through complete absence of detectable recalcitrant metabolites formed during biodegradation tests
    *Demonstrate low potential for skin irritancy
    *Be listed with a recognized environmental health organization as a product not harmful to people suffering from environmental illness, including, inter alia, the Envirodesic™ Certification Program, the Canadian Lung Association, the Asthma Society of Canada, and the Environmental Illness Society of Canada.

    FOR MORE INFORMATION, VISIT THIS RELATED WEB PAGE :

    CANADA'S "Environmental CHOICE Program" : 
    A Third-party Verifier and
    Certified Environmentally Responsible!


    "Enviromental CHOICE Program" :  Certification Criteria Document -- PRC - 097


    The ENVIRODESIC™ Certification Program identifies a growing family of cleaner products, healthier buildings, and expert services that promote "Maximum Indoor Air Quality" and sustainability. The Envirodesic™ certification mark is licensed to qualified builders, manufacturers and service-providers whose buildings, products and services meet stringent standards for healthy indoor environments. The Envirodesic team also helps manufacturers develop products which are ecologically sustainable.The Envirodesic™ Certification Program is administered by Small & Rubin Ltd. and has access to international experts in low-pollution design, toxicology, medicine, indoor air quality, marketing and related areas. The Envirodesic™ Certification Program is recognized by The Lung Association's "C.A.N. DO - The Movement for Clean Air Now" Campaign. This product is certified as a "sustainable low-emission cleaning product with minimal environmental impact, that is suitable even for the hypersensitive".

    FOR MORE INFORMATION, VISIT THIS RELATED WEB PAGE :
    "The ENVIRODESIC™ Certification Program"


              



    Most conventional cleaning chemicals such as general-purpose cleaners, glass cleaners, and carpet cleaners contain a known "poisonous" ingredient--"2-butoxyethanol"-- which serves as a water-soluble degreasing solvent for easier cleaning. Butoxyethanol is easily absorbed through your skin and poisons your blood, kidneys,and liver; and may cause pregnancy problems over an extended period of exposure. It's use leaves extensive microscopic chemical residues on all hard surfaces after application. Even more importantly, carpeting,  due to its retentive nature, absorbs more of this chemical ingredient during its cleaning, and may cause overexposure through off-gassing of its solvent vapors to babies,toddlers, and young children crawling or playing on these carpets after cleaning.In a well-cited case, the one year old son of famous celebrities almost died after their home's carpeting was professionally cleaned. " Kawasaki Syndrome" is an acute allergic reaction to cleaning chemicals which overtaxes the child's immune system and causes high fever and a rash. The health and well-being of children and pets are far more affected by conventional cleaning products than grown adults with full body size and weight.

    Additionally , many people have developed chemical sensitivities to many cleaning products formulated with common petrochemical-based detergents; preservatives; anti-microbial agents; Volatile Organic Compounds ( V.O.C.'s ); other synthetic chemicals; and especially general-purpose cleaners containing non-ionic surfactants.

    General purpose cleaners contain surfactants or wetting agents as the largest ingredient, usually non-ionic surfactants. Non Ionic surfactants are a class of surfactants, which includes Alkyl Phenols Ethoxylates and Alcohol Ethoxylates.

    Both Alkyl Phenol and Alcohol Ethoxylates are manufactured by reaction with Ethylene Oxide a known carcinogen which also possess several other physical health hazards including acute toxicity, high reactivity and mutagenic effects, neurotoxicity, and sensitization.

    Some non-ionic surfactants have demonstrated the ability to affect the reproduction system of fish and wildlife. Many concerns have been raised about very low levels of contaminants and combined contaminants in the environment. The accepted term for synthetic chemical reaction with the reproduction systems is ENDOCRINE DISRUPTORS.



    CLEANING WITHOUT HARMING



    "ECOgent" is a uniquely patented, multi-functional 100 % All-Natural Cleaning Product, with sound health and safety capabilities based on ground-breaking technology."ECOgent"  and distilled water have similar oral toxicity. All of its ingredients are derived from renewable, plant sources."ECOgent" biodegrades under aerobic and anaerobic conditions. Many biodegradable cleaners DO NOT significantly degreade in the absence of oxygen."ECOgent" degrades completely with ( aerobic ) --or--without ( anaerobic ) the presence of oxygen in river and lake sediment, waste treatment plants, and septic systems. Otherwise, toxic residues would persist in the environment which is likely with conventional cleaners. "ECOgent"  has proven to aerobically degrade in Ready Biodegradation Test OECD 301d and anaerobically in ASTM Test Method 1196-92 for Anaerobic Biodegradation of Organic Chemicals.

    "ECOgent"  has been tested and proven to clean as well as any nationally-branded all-purpose cleaner concentrate using Test Method ASTMC5343-93. As a BABY-SAFE CARPET SHAMPOO , it has proven NOT to promote carpet re-soiling.

    "ECOgent"  is designed to be used by Multiple Chemically Sensitive and Hypersensitive individuals. It has minimal effect on Indoor Air Quality emitting less than 0.05 % V.O.C.'s. into the air ( as defined by the "California Air Resources Board ( CARB )" and the U.S. EPA National Volatile Organic Compounds Emission Standards for consumer products. "ECOgent" is suitable for individuals, especially children, with asthma and sensitivities to airborne chemicals ( It is LISTED by the ENVIRONMENTAL ILLNESS SOCIETY OF CANADA in their El-Friendly Directory ). It leaves No chemical residues on hard surfaces to create off-gassing fumes or airborne contaminating powders.



    ONE PRODUCT =  MULTI-TASKING



    NOTE : "ECOgent"  is safe for use on most washable, hard and soft
    surfaces. It is always recommended to pre-test the effects of any cleaner on an inconspicuous area BEFORE general use.


    "ECOgent" can be used to clean most surfaces with little risk to your cleaning staff, employees, the general public, your family, or YOU ! It can be used to clean carpets, cars, floors, food handling equipment, general equipment, kitchens, mirrors, vehicles, walls, ...and much more !

    CARPET CLEANING
    Deep Cleaning Procedures:

    For best results, dry-vacuum carpet before cleaning. After cleaning, use fans to dry and avoid foot traffic before carpet dries. Dry-vacuum again after carpet dries thoroughly.

    A: Hot Water Extraction:

    1. Mix one ( 1 ) part "ECOgent"  with 20 parts water
      in pre-spray unit. (200 ml "ECOgent"  in 4L water, or 6.4 oz. per gallon)
    2. Spray heavily soiled areas and allow a dwell time of 15 to 20 minutes.
    3. Mix 12 ml "ECOgent"  per 4L hot water (1/3 oz. per gallon) in extractor and extract carpet.
    4. Addition of defoamer in soiled water tank may be needed.

    B: Cold Water Extraction:

    1. Mix 1 part "ECOgent"  to 10 parts cold water in pre-spray unit. (400ml "ECOgent"  in 4L water, or 12.8 oz. per gallon)
    2. Spray all areas to be cleaned and allow a dwell time of 15 to 20 minutes.
    3. Rinse carpet thoroughly with cold water only in extractor.
    4. Addition of defoamer in soiled water tank is recommended.

    C: Rotary Floor Machine followed by Rinse Extraction:

    1. Mix 1 part "ECOgent"  with 64 parts warm or hot water. (62.5 ml "ECOgent"  per 4L water or 2 oz. per gallon)
    2. Scrub carpet and allow 15 to 20 minutes before rinse extracting carpet with water only.
    3. Addition of defoamer in soiled water tank is recommended.

     

    D: Heavy Carpet Spotting:
    1. Apply "ECOgent"  undiluted.
    2. Allow time to penetrate stain.
    3. Tamp with a spotting brush.
    4. Rinse with the extractor

    E: Light Daily Spotting

    1. Mix 1 part "ECOgent" with 40 parts water in spray bottle. (100 ml "ECOgent"  in 4L water or 3.2 oz. per gallon)
    2. Spray stained area.
    3. Blot dry with towel or absorbent cloth.
    4. Repeat until stain no longer transfers onto cloth or towel.

    F: Pad Cleaning

    "ECOgent"  is an outstanding choice for light duty cleaning of carpets.

    1. Mix 1 part "ECOgent" with 64 parts warm or hot water in bucket and pre-spray unit. (62.5 ml "ECOgent"  per 4L water or 2 oz. per gallon)
      (Note: Do not use more than the recommended concentration.)
    2. Dip pad in premixed cleaning solution; squeeze excess liquid from pad.
    3. Spray soiled areas with pre-spray unit.
    4. Pad clean, changing pads as required.
    GENERAL CLEANING
    For most cleaning, only ONE dilution can be used to clean most common surfaces. Dilute one ( 1 ) part "ECOgent"  with 40 parts water. Use to spray and wipe all hard surfaces. Direct food contact surfaces require rinsing with potable water.

    GREASY SOILS
    For extremely greasy soils, dilute one ( 1 ) part of "ECOgent" with 10 parts warm or hot water. Spray or foam onto surface and allow to penetrate for a minimum of 10-15 minutes. Agitate and rinse with water.

    LAUNDRY :
    Washing :   Measure 1/2 cup ( 123 ml ) per normal load. Use more for heavily soiled loads. For improved results on whites, use presoak cycle.
    Pre-treating :  For stains, grease spots, and such, pour a small undiluted amount of "ECOgent"  onto stain, rub in, allow to sit for 5-10 minutes. Wash as usual.



    IN SUMMARY :

    Cleaning Condition :            Concentrate Dilution Ratio :        Procedure :
    Carpet Stains                           1 part to 40 parts water                 Spray, Allow                                                                                                             to Penetrate, and                                                                                                             Blot Dry

    Carpet   Care                              1 part to 128 parts water            Use in Extractor

    Damp Dusting                            1 part to 128 parts water                Damp Wiping

    Floors                                   1 part to 256 parts water                 Mopping

    Greasy Soils                                   1 part to 10 parts water                    Spray or Foam,                                                                                                               Allow to                                                                                                               Penetrate,                                                                                                               Agitate and Rinse.

    Soap Scum                                 1 part to 10 parts water                   Spray or Foam,                                                                                                               Allow to                                                                                                               Penetrate,                                                                                                               Agitate and Rinse.

    Truck Washing                          1 part to 256 parts water                 Pressure Washer                                                                                                             Hand Washing                                                                                         ( COMMERCIAL USE ONLY )

    Window Washing               1 part to 40 parts water                  Spray, Allow                                                                                                               to Penetrate, and                                                                                                               Wipe Dry




    APPLICATIONS :
  • Suitable for most commercial, institutional, and household cleaning tasks.
  • Suitable for use on polystyrene, polycarbonate, and plexiglass ( Test method 142.5 hours, immersion at 50 degrees ). Leading manufacturers of acrylic and polystyrene shower stalls, bath tubs, whirlpool tubs, and accessories suggest this product as a cleaner.



    MICRO FIBRE CLEANING CLOTHS
    The "ECOgent" CLEANING METHOD

              



  • STEP # 1 )  DILUTE  "ECOgent" CONCENTRATE
         1 PART WITH 64 PARTS WATER ( 2 OZ PER GAL./ 62 ML. to 4 LITRES ).
  • STEP # 2 ) DIP MICRO FIBRE CLEANING CLOTH INTO
          DILUTED CLEANING SOLUTION. WRING OUT AS DRY AS POSSIBLE.
  • STEP # 3 ) DAMP WIPE AND ALLOW TO DRY.
  • STEP # 4 ) RINSE CLOTH IN FRESH WATER FREQUENTLY.
          REPEAT STEPS # 2-4  TO CONTINUE CLEANING. MAKE FRESH
        "ECOgent"  CLEANING SOLUTION AS NEEDED.
  • STEP # 5 ) RINSE CLOTH IN FRESH WATER.
        ALLOW TO AIR DRY WHEN NOT IN USE.

    Micro fibre cleaning cloths is a material consisting of usually 70% Polyester and 30% Polyamide. Micro fibre's advantage over traditional cleaning cloths is that they can gather and hold a large quantity of soil. Micro fibre cleaning cloths are fairly inert and do not promote growth of bacteria, but the soils they gather and hold do. After all, bacteria require food or nutrients to grow and as long as contaminants gather in these cloths, frequent laundering or high temperature cleaning (90 degrees Celsius) is necessary to avoid bacteria buildup and odors. Equally important, cloths that are not cleaned thoroughly will eventually redeposit soils on surfaces being cleaned.

    Micro fibre cleaning cloths are incompatible with chlorine bleach and cationic surfactants such as fabric softeners, and likely quaternary disinfectants as well. "ECOgent" General Purpose Cleaner is perfectly compatible with micro fibre cleaning cloths, and its cleaning properties resolve the issue of accumulated contaminants in micro fibre cloths, which otherwise require rejuvenation or laundering.

    "ECOgent"  and micro fibre cloths work synergistically to enhance cleaning efficiency, and "ECOgent"  enables easy release and removal of hydrophilic and hydrophobic soils from the cloths, reducing the need for additional rejuvenation or laundering.

    The "ECOgent" Cleaning Method, which is ideal for use with micro fibre cloths, represents an environmentally compatible, highly sustainable solution to daily cleaning tasks on all common building surfaces.

    NOTE : The "BLUE" and "WHITE" Micro Fibre Cloths perform the same function. The different colored cloths differentiate functions to avoid confusion and cross-contamination.


    AGAIN,..ONE of the BEST WAYS of evaluating if a product is environmentally preferable is third party verification and certification of environmental benefits. We recommend either the United States "GREEN SEALS" ; Environment Canada’s ENVIRONMENTAL CHOICE PROGRAM ; and the Bid Specifications of U.S. States and Cities Purchasing Departments participating in the  "GREEN SEALS" Consortium. In all cases , review the specific criteria for certification.



    SPECIFICATIONS :

    Toxicity : 
    Non-hazardous by WHMIS/OSHA criteria.
    Product dermal toxicity is greater than 2000 mg/kg calculated
    Product oral toxicity is greater than 12000 mg/kg calculated
    Not hazardous to aquatic life at levels likely to enter the environment ( test method OECD 202 Pl. )

    Biodegradability : 
    Readily biodegradable ( Test method OECD 301D; combined ingredient-based testing.
    Demonstrates excellent Anaerobic Degradation ( Test method ASTM 1196-92; combined ingredient-based testing.

    Safety Data

    Animal Testing was avoided at all stages
                          of development and proving.
  • Package ( Bulk Liquid Concentrate)

    INTROKIT :
    Includes One ( 1 ) gallon of Concentrate
        Three ( 3 ) Workplace bottles with Triggers
        Two ( 2 ) "BLUE" Micro Fibre Cleaning Cloths
        Two ( 2 ) "WHITE" Micro Fibre Cleaning Cloths


    4/1 gallon to case +      Two ( 2 ) "BLUE" Micro Fibre Cloths/ Two ( 2 ) "WHITE"Micro Fibre Cloths

    1/5 gallon FEEDER Pail


    ACCESSORIES :
    Extra Workplace Bottles with Triggers

    Extra "BLUE" Micro Fibre Cleaning Cloths
    Extra "WHITE" Micro Fibre Cleaning Cloths



    (**)  HEALTHY CLEAN BUILDINGS 'GREEN':"ENVIRONMENTALLY-RESPONSIBLE"
    DISCLAIMER :  Some  product  lines are  manufactured  and  distributed  by  world-wide  corporations  known  for  being  leaders  and  innovators of high quality  products in  the  organic,  biodegradable, and  environmental fields.  In  some  instances, these  easily  recognizable
    brand  names are  being  replaced with generic descriptions  so  we  can  offer  our  valued  Internet  visitors  a  discounted   website  price,
    where applicable. Offer Void Where Prohibited.


    A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

    Commercial Cleaning | Home Cleaning

    Main | Cleaning Problems | Safety Data Sheets ( SDS ) | Orders
    General Info | Visit Us | Free Gift | Comments



    The material on this site is protected under the copyright laws of the United States
    of America and international conventions, and is the exclusive property
    of Cleaningpro or any licensee. All rights reserved. Cleaningpro 2015.
    Comments to: www.cleaningpro.com.